Other Glass Processing Machines

1、Layout

2.1	Drilling machine unit	1 Set
2.2	Programming control system	1 Set

3. Technical parameter

3.1 echnical parameter

Effective moving range	axis			[mm]
	axis（Distance between holes and edges）		40-2100	[mm]
	axis		440-2500	[mm]
	Minimum drilling hole center distance between Y1 and Y2		400	[mm]
The movement precision (The error range of diagonal is ±0.5mm,the glass edge straightness is ±0.05mm)	axis		±0.25mm/m	[mm]
	axis		±0.25mm/m	[mm]
Drilling diameter (Without countersink)			φ6–φ50	[mm]
The processing efficiency for T6 glass	φ 10 mm （data provided by seller）		≤ 8	[ s ]
	φ 20 mm （data provided by seller)		≤ 15	[ s ]
Qty for setting coordinates			X 10个/points Y 10个/points
Starting point coordinates
The speed of movement	X 轴/axis		0 -- 300	mm / S
	Y1Y2轴/axis		0 -- 100	mm / S
The speed of the screw propulsion	Z 1 -Z2轴/axis		0 -- 3	mm / S
	Z 3-Z4轴/axis		0 -- 3	mm / S
Convey speed			5-30m (Adjustable )
Overall size			L×W×H 7300X1800X3800 [mm]
The height of the table			600+/- 20 [mm]
Glass thickness			4-19 mm
The max glass size: L * W			4100 X 2500
The min glass size: L * W			800X300
Installation condition	Power supply	Voltage	(with Yellow-green wire)
		Watt	7KW
	Air pressure	Connector	8mm gas pipe
		Pressure	≥6.0	[bar]
		Flow	20	[m³/h]
	Lubricants	20 #
	Water supply	Connector	12mm water pipe
		Pressure	≥3.0	[bar]
Environment temperature	min.		15	[°C]
	max.	Without cooling equipment 装置	35	[°C]
		With cooling equipment	45	[°C]

3.2

Drilling component configuration parameters

Item：Material、Component configuration
No
1	Component	Name	45# A3 Plate、Tube
1	Component	Thickness	6、8、10、12、14、16 mm
2	The drilling motor	Manufacturer
2	The drilling motor	Model	0.9 KW
3	X Y axis / Drilling propulsion driving motor	Configuration part	The X / Y axis movement drive by Servo motor/ Drilling hole propulsion drive by Stepper motor
3	X Y axis / Drilling propulsion driving motor	Specification	130Series 80Series YK3913A Series
4	Ball screw	Manufacturer	TBI
5	Linear guide	Manufacturer	TBI
6	Bearing	Manufacturer	HRB C&U
Item: Electronic control component
No	供Supplier
1	Contactor	Manufacturer	Schneider
1	Contactor	Specification	AC220V
2	DC power supply	Manufacturer	Taiwan Meanwell
2	DC power supply	Specificatio	AC220V-DC24V
3	PLC	Manufacturer	KEYENCE
4	Cable	Manufacturer	Dadu
5	Drag chain cable Limit switch	Manufacturer	Hebei Cangzhou
5	Drag chain cable Limit switch	Manufacturer	Taiwan Tend
6	Controller	Manufacturer	Industrial computer
7	Sensor	Manufacturer	OMRON、SONON

4: Documents/Language

Circuit diagram

Chinese/English

Paper Document

5: Machine colors

6: Accessories

Glass Drilling Machine